Metal Marking Simulator
How to use it
- 1. Pick your metal, then start from an example such as Colour (MOPA) or Black anneal.
- 2. Change the lens, focus, speed, line gap, passes and pulses, and watch the test square, the close-up and the two gauges.
- 3. Open the test grid in the Test Grid Generator to make a LightBurn file, and mark it on scrap.
- 4. Tap what each real square made to keep your own chart, and match the simulator to your laser.
What you can learn
- • Why slow, gentle heat gives colours and black on stainless steel
- • Why a MOPA reaches colours a standard fiber laser can't
- • What focus, hatch, cross-hatch and extra passes do to a mark
- • How rainbow (holographic) lines are made
- • Why copper and brass need far more energy than steel
Questions
Will my laser give the same result?
Not exactly. It is a learning model built on rules of thumb, so it shows which way each setting pushes the mark. Your machine, lens and metal decide the real result, so test on scrap.
Can I copy the settings?
Use them as a starting range for a test grid, not as a recipe. The grid marked on your own metal is what tells you.
Which lasers does it cover?
Fiber lasers at 1,064 nm: standard (Q-switched) and MOPA, from 20 to 200 W, and UV lasers at 355 nm from 3 to 15 W, with F63 to F420 lenses. It does not model diode or CO2 lasers.
Does it remember my laser?
Yes, when you save a fiber laser in My workshop. Your adjustment and the real marks you record are kept in your browser, and nothing is uploaded.
Is it free?
Yes, with no sign-up.
Need more control, or a feature this tool doesn't have yet? Tell me: I add what makers ask for, often within days.
Try next: Test Grid Generator, Photo Test Chart, Coin Maker.
